توفیق فربغلانی

مهندس برق الکترونیک

متولد: ۱۳۶۷/۶/۳
وضعیت تأهل: مجرد
وضعیت سربازی: معاف
موبایل: (+۹۸)۹۱۶۰۱۰۲۴۵۱
آدرس: خوزستان، آبادان، کوی ولیعصر ردیف ۱۰۰۲ پلاک ۲
کارشناس ارشد الکترونیک حدود 8 سال تجربه کاری در صنعت نفت و پتروشیمی، کارشناس اتوماسیون صنعتی(DCS، PLC) ابزاردقیق، اسکادا، سیستم های کنترل نیوماتیکی، کالیبراسیون تجهیزات ابزاردقیق، آشنایی با فرآیند عملیات بهره برداری واحدهای پالایش و پتروشیمی.
  • کارشناسی ارشد برق الکترونیک و ابزار دقیق

    گرایش: الکترونیک

    موسسه/دانشگاه: دانشگاه علم و صنعت ایران

    تهران

  • 60%
    C++ programming
  • 60%
    برنامه متلب
  • 100%
    PCS7 SIEMENS DCS
  • 60%
    برنامه نویسی AVR
  • 80%
    بردهای الکترونیکی
  • 60%
    برنامه نویسی الکترونیک
  • 80%
    برنامه نویس پی ال سی
  • 0%
    کار کردن با انواع پی ال سی
  • 60%
    راه اندازی خط تولید
  • 80%
    Siemens SIMATIC STEP 7
  • 80%
    Siemens SIMATIC HMI
  • سرپرست اتوماسیون

    پالایشگاه نفت آبادان

    خوزستان، آبادان

    • تعمیر و نگهداری سیستم های کنترل و مانیتورینگ
    • شبکه های صنعتی
    • امنیت شبکه های صنعتی
    • برنامه نویسی برای سیستم های کنترل
    • تعمیر و نگهداری رایانه‌های صنعتی
  • انگلیسی

  • انگلیسی

    40%
    مهارت خواندن
    20%
    مهارت گفتاری
    80%
    مهارت نوشتن
    60%
    مهارت شنیداری
  • pcs 7

    موسسه: Gheshm voltage, tehran

  • CS Centum3000 yokogawa

    موسسه: Education Department of Abadan Oil Refinery

  • بررسی ویروس stuxnet بروی plc&dcs زیمنس در نهاد ریاست جمهوری

    بررسی نوع عملکرد ویروس stuxnet بروی s7-400 H تحلیل اثرات بجا مانده، و...
  • امنیت شبکه های صنعتی SCADA

    ناشر: توفیق فربغلانی

    امنیت شبکه های صنعتی SCADAبررسی و تحقیق بر روی پروتکل های كارت هاي CP1613a2 و کارت های VI701 و VI702 تفاوت و شباهت بین آنها بررسی ارتباط های point to point و شبکه های modbus بررسی روش عملکرد اترنت صنعتی و بررسی کارت های cp5611 و پروتکل هایی که امنیت شبکه های صنعتی را با مشکل روبرو میکنند.
  • سیستم حفاظتی Prosafe در yokogawa

    ناشر: توفیق فربغلانی

    سیستم حفاظتی Prosafe در yokogawa نوع برنامه نویسی در محیط cs centum 3000 و عدم دسترسی به فانکش بلاک های مورد نظر و دلخواه
  • DeltaV control system update phase 1

    کارفرما / درخواست کننده: Abadan oil refinery

    The control and monitoring system, which was designed and launched under the very old Windows Me, and the existing industrial computers were difficult to control the units due to the oldness of the operating group. The new design system was cold tested, then hot tested, and finally, after a month of effort, the control and monitoring system was updated from version 7.3 to version 10. The management expressed their appreciation in a letter.
  • Designing and programming and modifying the logic of the ROP unit control system

    کارفرما / درخواست کننده: Abadan oil refinery

    Due to hardware changes and non-engineering design, the unit was taken out of service and could not be started. Therefore, the problems of the precision instruments of the unit, including control valves and actuators, were solved, and then a new logic was programmed, config, and downloaded to the cpu plc s7-400, and immediately the unit It was launched and the delivery was put into operation. The management expressed their gratitude in a letter
  • commisining of Manturbo gas compressor for FCCU unit

    کارفرما / درخواست کننده: Abadan oil refinery

    Due to the sanctions, the installation and starting group of Manturbo compressors from Germany did not appear in Iran. Control system of Siemens Dcs pcs7 and protection system of Woodward company, Governors control system of Wago company The logic and instructions for setting up were studied, after two months of effort, the gas watt compressor and blower, which was required to set up a gasoline unit with a daily production of 5 million liters The CEO of Abadan Oil Refinery expressed his appreciation in a letter and referred it to the Minister of Oil.
  • Adding 3 HIS devices of Yokogawa monitoring system

    کارفرما / درخواست کننده: Abadan oil refinery

    Due to the addition of new graphic pages, three HIS devices were added. VINET industrial network design was done for VI701 card and changes and new design were downloaded through ENG or Server system. The management expressed their gratitude in a letter.
  • Designing the catalyst injection device control system for FCCU gas oline making unit

    کارفرما / درخواست کننده: Abadan oil refinery

    Designing the control system of the catalyst injection device for the FCCU gasoline making unit, programming s7-300, designing the industrial Modbus network and communicating the Siemens plc control system with Yokogawa's phase 3 dcs centum3000 control room / designing the automatic catalyst injection system only by determining the setpoint weight and duration. The management expressed their gratitude in a letter.
  • اعطا تقدیر نامه از طرف مدیر عامل پالایشگاه جناب مهندس حبیب الله ابوالحسنی

  • اعطا تقدیر نامه از ریاست اداره تعمیرات پتروشیمی آبادان جناب مهندس آذرنوید

  • اعطا تقدیر نامه از ریاست محترم اداره مهندسی طرحها پالایشگاه نفت آبادان جناب مهندس تقی زاده

  • اعطا تقدیر نامه از ریاست محترم اداره برق و ابزاردقیق پالایشگاه نفت آبادان جناب مهندس مجاهد

  • اعطا تقدیر نامه از مدیر محترم اداره عملیات و بهره برداری پالایشگاه نفت آبادان جناب مهندس جانکی

  • اعطا تقدیر نامه از ریاست محترم اداره ابزاردقیق پالایشگاه نفت آبادان جناب مهندس طهری

  • اعطا تقدیر نامه از ریاست محترم اداره کل نگهداری و تعمیرات پالایشگاه نفت آبادان جناب مهندس راشدی

  • اعطا تقدیر نامه از ریاست محترم اداره مهندسی طرحها/ فاز ۳/ پالایشگاه نفت آبادان جناب مهندس بن رشید

رزومه ی حرفه ای خود را در کمتر از ده دقیقه بسازید

اطلاعات پایه، سوابق تحصیلی، کاری و مهارتی خود را وارد کنید و رزومه گرافیکی و حرفه ای خود را در قالب های متنوع دریافت کنید.

ساخت رزومه در این قالب